







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterVanities, Tile & Fixtures in Doral, FL
Vanities, tile and fixtures are the three surfaces a Doral bathroom is judged by. A new vanity sets the storage and the look, the tile decides how the floor and shower survive South Florida humidity, and the fixtures are what your hands touch every single day. Get those three right and a mid-size bathroom feels new; get them wrong and you’ll be living with a wobbly cabinet and chipped grout for the next fifteen years.
Barrett & Sons Construction Doral handles this work as part of full Bathroom Remodeling, and on its own when the layout is staying put. Call (833) 734-5128 and a live person picks up, day or night. We’re owner-operated: Tom Barrett and his sons are on-site most days, not a call center three states away. Every eligible job gets the permit pulled and the inspection signed, every allowance is written into the contract before we order a single box of tile, and the written 90-Day Done Right Promise rides along on every completed job.

When You Need Vanities, Tile & Fixtures
Doral bathrooms take a specific kind of beating. The humidity runs high most of the year, the afternoon storms push water sideways against windows, and a lot of homes here were built fast during the 2000s boom. Here’s what we get called about most:
- Grout that crumbles or turns black no matter how often you scrub. In Doral’s climate, moisture wicks behind poorly sealed tile and stays there. Once the grout in a shower floor goes soft under a fingernail, the pan underneath is usually compromised too, and re-grouting alone just delays the problem.
- A vanity cabinet that swells at the base. Particleboard boxes are common in builder-grade homes around Downtown Doral and Costa Verde. When the toe kick and the bottom panel swell from a slow leak or a wet mop, no amount of paint fixes it. A plywood-box or moisture-rated cabinet replaces it properly.
- Fixtures that drip or corrode at the base. Doral’s water carries minerals that chew through cheap chrome finishes and cartridge seals. A faucet that drips at the handle, or a shower valve that’s getting harder to turn, is usually a decade-old builder unit that’s ready to be swapped for a Toto or American Standard set.
- Outdated 1990s or 2000s finishes. Beige four-inch square tile, oak-toned vanities, brass fixtures. If you’re preparing to sell, or you just bought a home in the Doral area and the bathroom is the last room that says “built in 2004,” new tile and a clean vanity do the most for the least.
- A shower that puddles or drains slowly. That’s almost always a slope problem under the tile, not a drain clog. Correcting it means tearing out the floor, redoing the membrane with a proper Schluter system, and setting new tile. It’s a real job, and it’s the kind that fails again in two years when it’s done without a permit.
- Accessibility updates for a parent or for yourselves. Curbless showers, comfort-height vanities, grab bars that are anchored into blocking instead of drywall. These need to be planned before the tile goes down, not after.
Our Vanities, Tile & Fixtures Process
We don’t start anything until you’ve seen the scope in writing. Here’s how a typical Doral vanity, tile and fixture job runs:
- Walkthrough and measurements. We come out, look at the plumbing and the venting, check whether the subfloor is sound, and measure the actual rough opening for the vanity. A 48-inch vanity doesn’t fit a 47-inch alcove, and we’ve all seen what happens when someone forces it.
- Written scope, written allowances. You get a line-item scope: vanity brand and model, tile selection allowance, fixture allowance, labor, haul-away. Any change after that, whether it’s a $200 faucet upgrade or an added niche, comes to you as a written change order before the work happens. The allowance that isn’t on paper is a surprise waiting for a date, so we put it on paper.
- Permits and inspections. For anything involving the shower pan, the waterproofing membrane, drain relocation, or electrical at the vanity, we pull the permit. The permit inspector works for you, not for us, which is exactly why we like him. If the last contractor told you permits were optional, that’s the contractor you should be calling us about.
- Demolition and waterproofing. Old tile and cabinets come out, the wall substrate gets repaired, and the wet areas get a proper waterproofing system – typically a Schluter membrane on the shower floor and walls, with the seams and corners banded per spec. This goes in before a single tile is set, and we encourage you to look at it before we cover it.
- Tile setting, vanity install, fixtures. Tile gets set on a flat, properly prepped substrate with full coverage, not dabs of thinset that leave hollow spots. The vanity cabinet is secured to the wall, the top is set level, and fixtures go in with new supply lines and shutoffs – not the 15-year-old ones already in the wall.
- Punch list and the 90-Day Done Right Promise. We walk it with you, write down anything that isn’t right, and fix it. For 90 days after we finish, if something fails, one call brings us back. That’s on the contract, not in a brochure.
Our crew members have up to 28 years of experience with tile, cabinetry and fixture installation, and every crew member is background-checked and uniformed before setting foot in your home. It’s the same reason neighbors in Doral feel comfortable handing us a key: they know the faces walking in.

Vanities, Tile & Fixtures Pricing in Doral
Here’s what we actually see. A single-vanity, standard tile, standard fixture refresh in a typical Doral bathroom lands around $4,200 to $7,800. A full bathroom that needs new tile throughout with a new shower pan and upgraded fixtures runs $8,000 to $15,000. Custom vanities with a stone top, a curbless shower, and premium fixtures push higher, sometimes $16,000 to $24,000 in the larger master baths around Doral.
| Line item | Typical Doral range |
|---|---|
| Vanity (36″-60″, standard cabinet + top) | $600 – $2,400 |
| Custom vanity or premium stone top | $2,000 – $6,500 |
| Floor tile (installed, standard porcelain) | $9 – $18 per sq ft |
| Wall or shower tile (installed) | $10 – $22 per sq ft |
| Waterproofing membrane and shower pan | $900 – $2,600 |
| Faucets and shower valve (per fixture) | $180 – $850 |
| Toilet (comfort-height, quality brand) | $350 – $1,100 |
| Tile and fixture removal + haul-away | $400 – $1,100 |
| Permit and inspection | Varies by scope – itemized on your written estimate |
What moves the number? Size of the bathroom, obviously. Whether the vanity footprint changes (which is where plumbing relocations start adding real cost). The tile itself: large-format porcelain is faster to install than small mosaic with lots of grout lines, and premium brands like Schluter systems or Toto fixtures sit higher than builder-grade. And whether the wall behind the tile needs repair – in older Doral homes we sometimes find the original drywall was never properly moisture-rated, so we’re replacing greenboard with cement board. That’s a good thing to know about before the job starts, not after.
Estimates are free, and the estimate you get is the estimate you keep unless you approve a change order first. We also honor a $40 Off Any Repair Over $200, a Free Second Opinion on Any Written Estimate, no trip charge inside the county, and a permanent 10% Senior & Veteran discount. Pricing reflects Doral’s market, and we’ll tell you the honest number the first time.
Tile Choices That Hold Up in Doral
Porcelain tile is the sensible workhorse for a Doral bathroom. It handles the humidity better than natural stone and won’t need the annual sealing a travertine floor demands. Large-format porcelain, 12×24 or 24×48, cuts down on grout lines and looks cleaner longer. If you want stone, we’ll do it, but we’ll tell you up front it needs sealing and re-sealing to survive here.
On the shower floor, small mosaic or a Schluter linear drain setup runs the water out properly on a slope that’s actually built right. On the wall, we set tile over a cement board or a waterproofed membrane – never over plain drywall, never over the old surface. And for vanities, a plywood-box cabinet with a moisture-rated finish outlasts particleboard by a decade in this climate, which is why we push Toto and American Standard fixtures alongside vanities built to handle the humidity rather than fight it.
What Fixtures to Choose (and What We’d Skip)
For faucets and shower valves, name brands with replaceable cartridges save you real money down the line. American Standard and Toto both hold up well in Doral’s water and have parts available at local plumbing suppliers. What we’d skip: off-brand imported fixtures with no parts support, and low-arc showerheads in a humid climate where you’ll want a good spray pattern. We’ll walk you through what fits your budget and your plumbing, not just what looks good in a showroom.
FAQs – Vanities, Tile & Fixtures
How much does a bathroom vanity and tile job cost in Doral?
A single-vanity refresh with standard tile and standard fixtures runs about $4,200 to $7,800 in Doral, and a full bathroom with new shower pan and upgraded fixtures is typically $8,000 to $15,000. The total depends on bathroom size, whether the vanity footprint moves, and the tile and fixture brands you choose. We itemize every line so you see where the money goes. Call (833) 734-5128 for a free estimate with real Doral pricing.
Can you replace just the vanity, or do I need the whole bathroom?
You can absolutely replace just the vanity, as long as the plumbing layout stays in the same place and the tile behind it is sound. If the vanity footprint is changing, the floor tile gets cut and patched, which is where people usually decide to redo the whole floor. We’ll tell you honestly whether a partial job or a full one makes more sense for your bathroom. Call (833) 734-5128 and we’ll look at it.
Do you need a permit for vanity, tile and fixture work in Doral?
Yes, for most of this work. Shower pan and waterproofing replacements, drain relocations, and any plumbing or electrical changes require a permit and inspection in Doral. Simple vanity swaps with no plumbing change sometimes don’t, but we verify that per job rather than guess. The permit inspector works for you, so we don’t skip the step. Call (833) 734-5128 and we’ll tell you exactly what your job needs.
How long does a vanity, tile and fixture project take in Doral?
A single-vanity refresh usually takes 5 to 8 working days; a full bathroom with new tile throughout runs 2 to 4 weeks, depending on tile complexity and inspection scheduling. We schedule inspections early in the process so they don’t hold up the punch list. Call (833) 734-5128 for a realistic timeline on your specific job – we don’t quote a two-day job and hand you a two-week bill.
If your Doral bathroom needs new vanities, tile or fixtures – or you’d just like a second opinion on the estimate you already have – call (833) 734-5128 for a free estimate. A live person answers, 24/7. We’ll walk the job, put the scope and allowances in writing, pull the permit, and back the finished work with the 90-Day Done Right Promise. Take a look at our home page and the full Bathroom Remodeling in Doral service if you want to see how this fits into a larger renovation.
Written by the team at Barrett & Sons Construction Doral, serving Doral.


